Hyundai H-1627, Instruction Manual

Page: 4 / 11

4
Instruction manual
• Press MODE button on the main unit until
FM icon appears on the display to enter Radio
mode.
• Press / button to fine tune the radio
frequency.
• Press and hold / button for
searching radio frequency automatically.
Preset Stations
The unit allows you to store up to 30 FM
stations for easy recall at any time.
• Tune to the radio station you want to store
in memory by using or button .
• Press RPT/MEM button, the memory
channel number ”P 01” will show on the
display, meanwhile, the Radio icon “FM”
flashes simultaneously
• Press / button to select the channel
number you desire to set.
• Press RPT/MEM button again to confirm
the preset location.
• Repeat steps 2-4 to store more stations if
necessary.
Antenna
Extend the telescopic antenna fully for best
reception.
Recalling Stored Preset Stations
1. Press PRESET button on the unit during
Radio mode to enter the radio memory
selecting mode.
2. Press / button to select the preset
channel.
USB/SD/MMC operation
Playback
• Connect your USB device or SD/MMC
card to the unit to access “USB” or “CARD”
mode, the relevant “USB” or “CARD” icon
appears on the display. The USB or SD/MMC
card will start playing automatically once the
contents scanning is finished.
• Press button to pause or resume
playback.
• Press VOL+ or VOL- button to raise up/
lower the volume level.
• Press button to skip to next track or
press button to the previous track.
• Press and hold or button to search
during the desired music.
• Press “RPT/MEM” button to change the
Repeat mode.
• To remove your USB device or SD/MMC
card, simply stop the playback and gently
unplug it from the connector.
According to the USB 1.1/2.0 Standard,
usage of a USB device with power current
consumption exceeding 500 mA is not
recommended without supplementary power
supply. Failure to use supplementary power for
connected USB drives with power consumption
exceeding this value as well as defective
USB drives may cause mechanical or thermal
changes of elements of this unit as well as
failure of internal elements of the USB port.
Such damages are not warrantee cases.
Warning: usage of external USB drives
containing BIN files in the root directory may
cause malfunction of the unit or damage to the
software.
AUX-IN (line in) operation
If you are using an iPod or other MP3/digital
audio player which can not plug in this unit
directly, you can still play it on the unit via an
audio connecting cable.
• Plug one end of the 3.5mm audio cable
(not included) into the headphone or line out
jack on your player, plug the other end of cable
into the unit AUX-IN jack of the unit.
• Turn on the external audio source and play
your device.
• Press MODE button until “AUX” icon
appears on the display.
• The volume level can now be controlled
through the main unit. Operate all other
functions on the external device as usual.