3
Note:
When replacing batteries the stored information will be lost.
Time setting
In the clock state, press the CLK.ADJ button once, the hour will flash on the screen. Press the UP and DOWN buttons to set the hour.
Press the CLK.ADJ button again, the minute will flash on the screen. Press the UP and DOWN buttons to set the minute.
Press the CLK.ADJ button again to save the time.
Radio operation
Power switch
Press the POWER button once to turn the radio on, the last band frequency before turning off the radio is displayed. Press the POWER button again to
turn off the radio, the time is displayed.
Adjust volume
In receiving state, rotate VOL regulator to adjust volume.
Earphones socket
For private listening please insert the earphones into the Phone jack (the speaker inside the radio disconnects automatically), now you can listen to the
radio by earphones.
Band selection
In receiving state, press the BAND button to choose AM/FM band.
Manual search
In receiving state, press the UP and DOWN buttons to select your desired station frequency manually. Each press, the frequency varies one step, until the
station is found.
Attention:
Manual searching station mode is fit to search weak signal stations.
Automatic search
In receiving state, keep pressing the UP and DOWN buttons for few seconds, when you see the display frequency automatic change, let go, when there is
a station, it will stop searching automatically.
In the course of automatic searching, press the UP and DOWN buttons, it will discontinue searching.
Attention:
Automatic searching station mode is fit to search strong signal stations.
Storing the stations
The unit can store up to 10 AM and 10 FM stations.
On radio mode, select your desired band by press UP or DOWN buttons.
Press the PRESET button to enter into the preset mode. The preset number will show on the display.
Press the MEMORY/FC button to select a memory number. Press the PRESET button to confirm your memory setting.
