background image

6

Using Reset Button:
Press the reset button once, the radio will restore to normal work.

Attention:

After each press on the reset button, the information pre-stored in the radio will be cleared, you need store information and adjust time again.

Time setting

The 24-hour time system is used for the radio.

Setting time

1.In the clock state, press the band / Mode button once, the hour time will be flashed on the screen, press the up tuning / down tuning within 5 seconds to set
the hour time, the figure will be changed each press, if keep pressed, the figure will be changed continuously till released.

2. Also in the clock state press the band / Mode button twice, in the same way can be set the minute time.

Alarm function

Alarm on time setting

1. In the clock state press the band/ Mode button three times, the symbol 

 will display on the screen, which means the radio is in alarm hour set state.

Press up tuning /down tuning to set the alarm on hour.
2. In the clock state press the band/ Mode button four times, the radio will be in alarm minute set state, press up tuning/down tuning to set the alarm on
minute.

Using alarm on function

1.In the clock state, press the Alarm button/store scan button, the alarm symbol 

 will display on the screen, which means the alarm on function works.

2.When the alarm on time reaches, the radio will automatically turn on and receive the last tuned frequency.

Attention:

while using alarm on function to turn on the radio, it will turn off automatically after two hours.

Sleep switch OFF

The sleep automatically turn off function is set in the radio, it will automatically turn off radio when sleeping to listen to the radio, in order to avoid wasting
power.

1.In the clock state, keep the Power switch/Sleep OFF button pressed to turn on the radio, the symbol "

" and  90  will display on the LCD, the sleep

OFF function works, and it will auto turn off after 90 minutes.

2. In the sleep OFF state press the power switch/ sleep OFF button to adjust the sleep OFF time.

The change law of the sleep time is as follows:

90-80-70-60-50-40-30-20-10-band frequency
                                         (cancel sleep function)

3.The sleep time is adjusted, the last band frequency before turning off is displayed on the display screen after five seconds. You can receive
your desired station program, the radio will be turned off automatically, when reaching the sleep time.
4.If you want to turn off the radio in advance, please press the Power switch/sleep OFF button to turn off the radio, the time appears on the display screen.

Summary of Contents for H-1614














Reviews: