3
Power supply
Battery operation
·
Open the battery compartment cover.
·
Insert 3 batteries (UM1, 4.5 V). Please observe correct battery polarities or the set will not work.
·
Close the battery compartment cover.
·
When the batteries are exhausted, they should be removed from the set to prevent leakage.
AC operation
·
The appliance is for household use only.
·
Before the first connecting of the appliance check that voltage indicated on the rating label corresponds the mains voltage in your home.
·
Insert the plug into the power supply.
Radio operation
·
Select your desired broadcasting band with Band switch.
·
Rotate the Tuning control regulator to receive the desired broadcast.
·
The Tuning Indicator will light up when the correct station is received and the station signal is sufficiently strong.
·
Adjust the level of sound with Volume control regulator.
·
Move the Tone switch to choose one of the four tones.
·
If you want to turn on the radio or make the volume louder, turn the Power switch/Volume control clockwise. If you want to turn off the radio or make
the volume lower, turn the Power switch/Volume control counter-clockwise.
Antenna
·
For FM reception, use the telescopic antenna. Pull out the antenna and change its length and angle for the best reception.
·
For SW reception, use the telescopic antenna. Pull out the antenna and keep it vertical to get the best reception.
·
The MW antenna is magnetic bar within the system. Rotate the unit to get the best reception.
Connections
Stereo headphone connecting
·
For private listening radio, insert 3.5 mm headphone into the stereo headphone jack.
·
Adjust volume control to the appropriate level as desired.
·
When the stereo headphone jack is plugged, speakers will disconnect automatically.
