Hyundai H-1542, Instruction Manual

Page: 4 / 11

4
Instruction manual
Snooze control
• When the alarm time comes, the signal will
sound for 30 minutes if no button is pressed.
After that the sound will mute and start at the
same time the following day.
• When the alarm is on, press SNOOZE/
SLEEP button to interrupt the alarm signal.
After 9 minutes the alarm will be on again.
• If you want to stop the alarm, press
button. The alarm will resume in 24 hours.
Laser projection
• This unit is equipped with a laser projector
showing the current time synchronized with the
main display.
• Press ON/OFF button to switch the
projector on. Adjust manually the position of
the projector unit to direct the laser beam on a
plain surface (ceiling, wall).
• Using FOCUS regulator, adjust the
projected image focus. Maximum projection
distance is 2.7 m.
• Press 180
0
FLIP button to flip the projected
image.
Infrared sensor
• You can perform some functions with the
display of this unit by placing your hand over
the infrared sensor.
• In radio off mode, place your hand over
the sensor for 1 second; the display will show
the temperature.
• In radio on mode, place your hand over
the sensor for 2 seconds; the unit will go to
sleep time stting mode.
• When the alarm is on, place your hand
over the sensor for 1 second to interrupt the
signal for 9 minutes (snooze function).
• In radio off mode, when the display
dimmer switch is slid to AUTO OFF position,
the display will switch off after 15 seconds.
Place your hand over the sensor for 1 second;
• The AM signal is picked up through the
built-in antenna. The unit should be placed to a
position for the best reception.
Sleep to music
• In Radio mode, press SNOOZE/SLEEP
button to turn on sleep mode. The default sleep
time of 90 minutes will be set. Press this button
repeatedly to select 60, 30 or 15 minutes of
sleep time period. The figures will blink on
the display for 5 seconds. “SLEEP” will be
displayed meaning that the sleep function is
activated. The radio will turn off automatically
after the preset time period elapses.
• To cancel the sleep function, press
button.
Alarm operation
Setting the alarm
• Press and hold AL.SET button. Press
it repeatedly to cycle through alarm settings
in following order: Alarm 1 hours => Alarm 1
minutes => Alarm 1 weekend => Alarm 2 hours
=> Alarm 2 minutes => Alarm 2 weekend. The
selected setting will blink.
• Press repeatedly TEMP/ button or
press and hold it to decrease the setting; press
repeatedly Y-M-D/
button or press and hold
it to increase the setting.
• In normal mode, press repeatedly AL.SET
button to show the alarm settings.
• Slide the display dimmer switch to AUTO
OFF position. After 15 seconds the display will
switch off and it will resume when the preset
alarm time comes.
Alarm signal selection
Press repeatedly AL.1 button (for Alarm 1)
or AL.2 button (for Alarm 2) to select alarm
sound. Press once to select buzzer ( will
be on), press twice to select radio ( will be
on), press thrice to disable alarm signal (no
indication will be on).