2
3
Instruction manual
Instruction manual
set will not work normally from the battery
supply, but there is now the advantage that, in
case there is a mains current failure, your clock
will continue to work. The clock display will not
light up, the clock time and alarm setting will be
held in the clock memory by the battery back-
up system.
This enables you to move the set from place
to place without re-setting the clock every time.
The battery back-up system is only meant to
be used from short temporary power failures.
For longer durations the battery may become
exhausted or there may be some deviation in
accuracy.
• When the battery is exhausted, it should
be removed from the set to prevent leakage.
If you do not wish to take advantage of the
battery back-up system, your set will work
normally without a battery. However, if
disconnected from the mains, the clock figures
will flash when the mains are re-connected and
you must re-set the clock.
AС operation
• The appliance is for household use only.
• Before the first connecting of the appliance
check that voltage indicated on the rating label
corresponds the mains voltage in your home.
• Insert the plug into the power supply.
• The set is now working as electronic clock.
General operations
Setting the clock
• Press and hold TIME button.
• Do not release TIME button; press HOUR
button or MIN button to set the clock display to
the correct time.
• Release all the buttons when finished the
setting.
Dimmer function
To adjust the brightness of the display, slide
the DIMMER switch to HI or LOW position.
Radio operation
Tuner operations
• Slide AUTO/OFF/ON switch to ON and
turn on the volume.
• Adjust the program by rotating TUNING
regulator.
• Use VOLUME regulator to adjust volume
level.
Sleep to music
The radio can be set to play and to switch off
automatically after a preset time.
• Slide AUTO/OFF/ON switch to OFF or
AUTO position.
• Press SLEEP button once.
• You can have maximum 1 hour and 59
minutes playing the radio to accompany you
to sleep.
• To set for a desired period of sleep, press
and hold SLEEP button and then press HOUR
button and MIN button simultaneously to set 1
hour 59 minutes. Press repeatedly MIN button
to set the desired period of the sleep function.
• If you want to turn off the radio before
sleep time has expired, press SNOOZE button.
Alarm operation
Setting the alarm
• Slide AUTO/ON/OFF to AUTO position.
• Press and hold ALARM button.
• Without releasing ALARM button, press
HOUR button or MIN button to set the desired
wake up time.
• Release ALARM button to show the
current time.
• The radio will play automatically at the
present time.
• If you need to wake up to buzzer, set
VOLUME/BUZZ regulator to BUZZ position by
decreasing volume until a click.
Snooze control
• When the alarm is on, press SNOOZE
