3
This enables you to move the set from place to place without re-setting the clock every time. The battery back-up system is only meant to be used from
short temporary power failures. For longer durations the battery may become exhausted or there may be some deviation in accuracy.
When the battery is exhausted, it should be removed from the set to prevent leakage. If you do not wish to take advantage of the battery back-up system,
your set will work normally without a battery. However, if disconnected from the mains, the clock figures will flash when the mains are re-connected and
you must re-set the clock as described in the AC Operation paragraph.
operation
The appliance is for household use only.
Before the first connecting of the appliance check that voltage indicated on the rating label corresponds the mains voltage in your home.
Insert the plug into the power supply.
The set is now working as an electronic clock.
Setting the clock
To set time and date
Press and hold for 2 seconds the C-ADJ button to enter the hour set mode.
Press the TIME UP/DOWN buttons to set hour.
Press the C-ADJ button to enter the minute set mode.
Press the TIME UP/DOWN buttons to set minute.
Press the C-ADJ button to enter the week day set mode.
Press the TIME UP/DOWN buttons to set the week day. LED indicator d1 means Monday. d7
Sunday.
Press the C-ADJ button to confirm settings.
Display setting
In Standby mode press the DISPLAY button to show: Alarm-1 => Alarm-2 => Clock display.
In Radio mode press the DISPLAY button to show: Radio frequency => Alarm-1 => Alarm-2 => Remain time of Sleep timer => Clock display.
Radio operations
Tuner operations
To turn the radio on press the AL RESET/POWER button.
Press the BAND button to select the desired band.
Rotate the TUNING knob to select your favorite station.
