2
3
Instruction manual
Instruction manual
be used from short temporary power failures.
For longer durations the battery may become
exhausted or there may be some deviation in
accuracy.
• When the battery is exhausted, it should
be removed from the set to prevent leakage.
If you do not wish to take advantage of the
battery back-up system, your set will work
normally without a battery. However, if
disconnected from the mains, the clock figures
will flash when the mains are re-connected and
you must re-set the clock.
AС operation
• The appliance is for household use only.
• Before the first connecting of the appliance
check that voltage indicated on the rating label
corresponds the mains voltage in your home.
• Insert the plug into the power supply.
• The set is now working as an electronic
clock. Figures will blink on the display, showing
that you should set the clock.
General operations
Setting the clock
• Press and hold TIME button.
• Do not release TIME button; press HOUR
button or MIN button to set the clock display to
the correct time.
• Release all the buttons when finished the
setting.
Dimmer function
To adjust the brightness of the display, slide
the DIMMER switch to HIGH or LOW position.
Radio operation
Tuner operations
• Slide ON/OFF/AUTO/BUZZ switch to ON
and turn on the volume.
• Slide AM/FM switch to AM or FM position.
• Adjust the program using TUNING
regulator.
• Use VOLUME regulator to adjust
volume level.
For FM reception, this unit is equipped
with an external wire as FM antenna. Be
sure to untwist it to its fullest length for peak
performance.
Sleep to music
The radio can be set to play and to switch off
automatically after a preset time.
• Slide BUZZ/AUTO/OFF/ON switch to OFF
or AUTO position.
• Press SLEEP button once.
• You can have 59 minutes playing the radio
to accompany you to sleep.
• To set for a desired period of sleep
(maximum 1 hour 59 minutes), simply press
and hold SLEEP button and then press HOUR
button or MIN button to set the desired period
of the sleep function.
• To turn off the radio before sleep time
expires, press SNOOZE button once.
Alarm operation
Setting the alarm
• Press and hold ALARM button.
• Without releasing ALARM button, press
HOUR button or MIN button to set the desired
wake up time.
• Release ALARM button to show the
current time.
• Slide BUZZ/AUTO/OFF/ON to AUTO
position. The radio will play automatically at the
present time.
Alarm sound setting
Follow the steps of “Setting the alarm” and
slide BUZZ/AUTO/OFF/ON switch to BUZZ
position. You will be awakened by the buzzer
alarm.
