background image

3

Instruction manual

there is a mains current failure, your clock 
will continue to work. The clock display 
will not light up, the clock time will be held 
in the clock memory by the battery back-
up system.

This enables you to move the set 

from place to place without re-setting 
the clock every time. The battery back-
up system is only meant to be used 
from short temporary power failures. 
For longer durations the battery may 
become exhausted or there may be some 
deviation in accuracy.

•  When the battery is exhausted, 

it should be removed from the set to 
prevent leakage. If you do not wish 
to take advantage of the battery 
back-up system, your set will work 
normally without a battery. However, if 
disconnected from the mains, the clock 
figures will flash when the mains are re-
connected and you must re-set the clock.

AС operation

•  The appliance is for household use 

only.

•  Before the first connecting of the 

appliance check that voltage indicated on 
the rating label corresponds the mains 
voltage in your home.

•  Insert the plug into the power supply.
•  The set is now working as an electronic 

clock. Figures will blink on the display, 
showing that you should set the clock.

General operations

Setting the clock

•  Press and hold TIME button.
•  Do not release TIME button; press 

HOUR button or MIN button to set the 

clock display to the correct time.

•  Release all the buttons when finished 

the setting.

Dimmer function

To adjust the brightness of the display, 

slide the DIMMER switch to HIGH or LOW 
position.

Radio operation

Tuner operations

•  Slide ON/OFF/AUTO/BUZZ switch to 

ON and turn on the volume.

•  Slide AM/FM switch to AM or FM 

position.

•  Adjust the program using TUNING 

regulator.

•  Use VOLUME regulator to adjust 

volume level.

Note:

 For FM reception, this unit is 

equipped with an external wire as FM 
antenna. Be sure to untwist it to its fullest 
length for peak performance.

Sleep to music

The radio can be set to play and to 

switch off automatically after a preset 
time. 

•  Slide ON/OFF/AUTO/BUZZ switch to 

OFF or AUTO position.

•  Press SLEEP button once.
•  You can have 59 minutes playing the 

radio to accompany you to sleep.

•  To set for a desired period of sleep 

(maximum 1 hour 59 minutes), simply 
press and hold SLEEP button and then 
press HOUR button or MIN button to set 
the desired period of the sleep function.

•  To turn off the radio before sleep time 

expires, press SNOOZE button once.

Reviews: