2
Description
1. On/Off/Auto/Alarm
switch
2. Dimmer
switch
3. Sleep
button
4. Alarm Set / Off button
5. Hour
button
6. Minute
button
7. Time set button
8. Snooze
button
9. Volume control regulator
10. Band switch
11. Tuning control regulator
12. Dial lens
Important safeguards
·
CAUTION
: To reduce the risk of electric shock, do not remove cover (or back). Prefer servicing to qualified service personnel.
·
DANGEROUS VOLTAGE:
Uninsulated dangerous voltage, that may be of sufficient magnitude to constitute a risk of electrical shock to persons, is
present within this product enclosure.
·
ATTENTION:
The owner s manual contains important operating and maintenance instructions for your safety, it is necessary to refer the manual.
Power supply
Battery operation
·
Connect a 9 volt (006P) battery (not included) to the terminals inside the battery compartment. There is now the advantage that, in case there is a mains
current failure, your clock will continue to work. The clock display will not light up, but the clock time will be held in the clock memory by the battery
back-up system. This enables you to move the set from place to place without re-setting the clock every time. The battery back-up system is only meant
to be used from short temporary power failures. For longer durations the battery may become exhausted or there may be some deviation in accuracy.
·
When the battery is exhausted, it should be removed from the set to prevent leakage. If you do not wish to take advantage of the battery back-up system,
your set will work normally without a battery. However, if disconnected from the mains, the clock figures will flash when the mains are re-connected and
you must re-set the clock as described in the Setting the correct time paragraph.
