Hyundai H-1443, Instruction Manual

Page: 5 / 13

5
Instruction manual
enter additional memories into the program.
• When all the desired tracks have been
programmed, press /PLAY/PAUSE button to
play the disc in the order you have programmed.
• Reviewing the programm: in stop mode
press SKIP-/ or SKIP+/ buttons; the
display will show the memorized track numbers.
You can erase the contents of the
memory by one of the following methods:
- opening the CD door;
- pressing /CD/USB button twice;
- selecting RADIO source.
Good quality sound is guaranteed
only when playing licensed discs. Besides,
depending on the disc brand or the burning
speed some reding problems may occur.
Cassette playback
• Slide FUNCTION switch to TAPE position.
• Press
button to open the cassette
compartment.
• Insert a cassette and push the cassette
door to close the cassette compartment. The
full tape reel should be on the right side.
• Press button to start playback.
• Press button to pause playback. If you
press it again the playback will continue.
• Press button to stop playback, press
the button again to open the cassette door so
you can take out the tape.
• When the tape plays to the end, playback
will stop automatically.
• Fast forward and rewind: You can run
forward and rewind the tape. Stop playback.
Use
button for fast forward and button
for fast backward playback. When you have
reached the desired tape point, press
button to stop the process.
Never use fast forward or rewind
operations during playback. This may cause
damage to the tape.
Recording
Recording from radio
• Set FUNCTION switch to AM or FM
position.
• Tune to the desired station by turning
TUNING control regulator.
• Insert a blank cassette into cassette
compartment.
• Press button. The recording will start.
• For brief interruption press button. To
resume recording press the button again.
• To stop recording press button.
Recording from CD
• Set FUNCTION switch to CD/AUX position.
• Insert your cassette tape in the cassette
compartment.
• Start the desired track playback.
• Press button. The recording will start.
• For brief interruption press button. To
resume recording press the button again.
• Press button when finished. Then
stop CD playback by pressing /CD/USB
button of the CD player.
• You may want to monitor during
recording. You can adjust the sound with
VOLUME regulator. These adjustments do not
affect the content of recording.
• This deck is not suitable for recording
on CHROME (IEC II) or METAL (IEC IV) type
cassettes. For recording use NORMAL type
cassette (IEC I) on which the tabs are not broken.
• At the beginning and end of the tape, no
recording will take place during 7 seconds, when
the leader tape passes the recorder heads.
• When in process of recording or playback
the end of the tape is reached, the tape
stops automatically and the relevant button is
released.
Maintenance and care
• Check your batteries regularly, old or
discharged batteries should be replaced. If the