![background image](http://html.mh-extra.com/html/hyundai/h-1434/h-1434_instruction-manual_2197146003.webp)
2
3
Instruction manual
Instruction manual
Important safeguards
•
Attention:
The owner’s manual contains
important operating and maintenance
instructions. For your safety, it is necessary to
refer to the manual.
•
Dangerous voltage:
Uninsulated
dangerous voltage that may be of sufficient
magnitude to constitute a risk of electrical
shock to persons is present within this product
enclosure.
•
Caution:
To reduce the risk of electric
shock, do not dismantle the body. Prefer
servicing to qualified service personnel. Do not
use the unit in places where it can be exposed
to water, moisture and dust. Make sure that
pins or other foreign objects do not get inside
the unit; they may cause malfunctions, or
create safety hazards such as electrical shock.
Power supply
Battery operation
• Open the battery compartment cover.
• Insert 8 x UM-2 “C” size batteries. Please
observe correct battery polarities or the set will
not work.
• Close the battery compartment cover.
AC operation
• Before the first connecting of the appliance
check that voltage indicated on the rating label
corresponds the mains voltage in your home.
• Plug the corresponding end of cord into
the AC socket on the rear of the set.
• Insert the plug into power supply.
Caution:
• When the set is only used with AC or is
not used for 2 weeks or more, please remove
the batteries, to avoid damage to the set from
leakage of batteries.
• Always switch off the unit when not in use.
• Always unplug the appliance from power
supply, when no use long time.
Headphone jack
• For private listening, insert 3.5 mm
headphone into the stereo headphone jack.
• Adjust volume to the appropriate level as
desired.
• When the stereo headphone jack is
plugged, speaker will disconnect automatically.
AUX line in jack
You can connect the audio output of an
external device (such as a CD-player) to
this unit, to listen to the sound of that device
through the amplifier of this unit.
• To connect an external audio device (eg.
MP3 player), please use a standard stereo
cable (not included) with 3.5 mm to 3.5 mm
plugs to connect the headphone out or audio
line-out of the external device to the AUX input
socket of this unit.
• Slide the function switch to AUX position.
• Turn on the external device.
Radio operation
• Set the function switch to RADIO position.
• Select your desired broadcasting band by
setting the band switch to the desired position.
AM of FM will be displayed.
• Rotate TUNING regulator to tune to your
desired radio station frequency. The radio
frequency will be shown on the display.
• Rotate VOLUME regulator to adjust sound
volume level.
• To turn off the radio set the function switch
to OFF position.
Antenna
• For FM reception, adjust the telescopic
antenna appropriately to obtain the best
reception on the band selected.
• The AM signals are picked up through the
built-in antenna. The set should be placed to
Summary of Contents for H-1434
Page 13: ......