6
Repeat mode
•
Press the REPEAT button once for single track repeat playing.
•
Press REPEAT twice for all tracks repeat playing.
•
To cancel repeat play, press REPEAT button until the repeat indicator turn off.
Program mode
•
Up to 32 tracks can be programmed for disc play in any order or the same track can be repeated up to 32 times. Before use, press the STOP button.
•
Press the PROG button.
•
Select a desired track by using the
/
or
/
buttons.
•
Press PROG button to confirm.
•
Repeat steps described above to enter additional memories into the program if necessary.
•
When all the desired tracks have been programmed, press PLAY/PAUSE button to play the disc in the order you have programmed.
Note:
You can erase the contents of the memory by:
-
opening the CD door
-
selecting FM or AM source
-
pressing PROG and then STOP button
-
in the OFF position.
Note:
Good quality sound is guaranteed only when playing licensed CD-R/CD-RW discs.
Maintenance and care
•
Check your batteries regularly, old or discharged batteries should be replaced. If the unit is not going to be used for some time or is being run exclusively
on the alternative power, remove the batteries to avoid leakage and damage.
•
Electronic products of this kind should never be subjected to moisture or extreme temperatures.
•
If necessary, clean the unit with a piece of cloth dampened with water only (be sure the AC power cord is disconnected from the power supply).
CD protection
•
When pick up the CD disc, always hold the edge of the disc, never touch the surface of the disc, it would scratch the disc surface and may occur sound
distortion or raise reading problem.
