4
Adjust the telescopic antenna appropriately to obtain the best reception on the band selected.
Adjust the level and quality of sound with VOLUME regulator.
To turn off the radio, set the FUNCTION switch to TAPE (OFF) position, without any tape button pressed.
FM/FM stereo reception
Set the BAND switch to FM position, programmer is received in mono mode.
Note:
In particular when stereo signal is weak and much noise are received, it is preferable to receive the programmer in mono.
Set the BAND switch to FM ST position, programmer is received in stereo mode, thus FM Stereo indicator should light up.
Cassette playback
Slide the FUNCTION switch to TAPE (OFF) position.
Press the STOP/EJECT button to open the cassette compartment. Insert a cassette and push the cassette door to close the cassette compartment.
Press the PLAY button to start the playing.
Adjust the level and quality of sound with VOLUME knob.
Press the PAUSE button to pause the playing.
Press the STOP/EJECT button to stop the playing, press the button again to open the cassette door and you can take out the tape.
Press the STOP button followed by the REW or F.FWD button to rewind or forward the tape at high speed.
When the tape plays to the end, playing will be stopped automatically and releases the PLAY button at the same time.
Cassette tape recording
Open the cassette door; insert a blank cassette with the tape-side up, into the proper guide-rails on the inside of the cassette door.
Gently push the cassette door forward (inwards) to close it.
Make sure the tape is properly inserted before doing so. The set is now ready to start recording, which can be done from either the radio or CD-player.
Recording from radio
Set the FUNCTION switch to RADIO position.
Tune to the desired station by pressing the NEXT or BACK button.
Press the PLAY button and RECORD button on deck simultaneously to start recording.
Recording from CD
Set FUNCTION switch to CD position.
Press RECORD and PLAY buttons simultaneously to start recording.
Press the PAUSE button.
Start the CD-player and select the exact song to be recorded.
Release the PAUSE button to start recording.
