![background image](http://html.mh-extra.com/html/hyundai/h-1402/h-1402_instruction-manual_2197336005.webp)
4
Repeat mode
·
Press the REPEAT button once for single track repeat playing and the repeat indicator will flash.
·
Press twice for all track repeat playing and the repeat indicator will light on steadily.
·
To cancel repeat play, press REPEAT button until the repeat indicator turn off.
Program mode
·
Up to 20 tracks can be programmed for disc play in any order or the same track can be repeated up to 20 times. Before use, be sure to press the STOP
button.
·
Press the PROGRAM button, the track number will flash on the display.
·
Select a desired track by using the SKIP AND SEARCH buttons.
·
Press PROGRAM button to confirm.
·
Repeat steps described above to enter additional memories into the program if necessary.
·
When all the desired tracks have been programmed, press PLAY button to play the disc in the order you have programmed.
·
To stop the CD, press the STOP button.
NOTE:
The program memory will be cleared only when the CD compartment is opened or turn off the CD or power supply.
·
To remove the CD from the unit open the CD door.
·
To turn off the CD player set FUNCTION switch to TAPE position.
MP3 operation
·
Set FUNCTION switch to CD position.
·
Press the OPEN button once to open the CD door. Put a MP3 disk into the CD compartment and close the CD door.
·
In MP3 playback mode all functions are available as in CD operation mode.
·
CD 10 button is used for crossing over 10 tracks.
Recording
Recording from radio
·
Set the FUNCTION switch to RADIO position.
·
Tune to the desired station by turning the TUNING control regulator.
·
Insert a blank cassette into cassette compartment.
·
Press the PLAY button and RECORD button on deck simultaneously to start recording.
Recording from CD
·
Set FUNCTION switch to CD position.
·
Insert your cassette tape in the cassette compartment.