Hyundai H-1 i800 2016 Owner'S Manual Download Page 197

Page: 197 / 419

4 123

Features of your vehicle

✽

NOTICE -

USING THE iPod

DEVICE

• Some iPod

models may not support

communication protocol and files may
not properly play.
Supported iPod

models:

- iPod

Mini

- iPod

4th (Photo) ~ 6th (Classic)

generation

- iPod

Nano 1st~4th generation

- iPod

Touch 1st~2nd generation

• The order of search or playback of

songs in the iPod

can be different

from the order searched in the audio
system.

• If the iPod

disabled due to its own

malfunction, reset the iPod

. (Reset:

Refer to iPod

manual)

• An iPod

may not operate normally

on low battery.

(Continued)

(Continued)
• Some iPod

devices, such as the

iPhone

, can be connected through

the

Bluetooth

Wireless Technology

interface. The device must have audio

Bluetooth

Wireless Technology capa-

bility (such as for stereo headphone

Bluetooth

Wireless Technology ). The

device can play, but it will not be con-
trolled by the audio system.

• To use iPod

features within the

audio, use the cable provided upon
purchasing an iPod

d device.

• Skipping or improper operation may

occur depending on the characteris-
tics of your iPod

/iPhone

device.

• If your iPhone

is connected to both

the

Bluetooth

Wireless Technology

and USB, the sound may not be prop-
erly played. In your iPhone

, select

the Dock connector or

Bluetooth

Wireless Technology to change the
sound output (source).

(Continued)

(Continued)
• When connecting

iPod

with the

iPod

Power Cable, insert the connec-

tor to the multimedia socket complete-
ly. If not inserted completely, communi-
cations between

iPod

and audio may

be interrupted.

• When adjusting the sound effects of

the

iPod

and the audio system, the

sound effects of both devices will over-
lap and might reduce or distort the
quality of the sound.

• Deactivate (turn off) the equalizer

function of an

iPod

when adjusting

the audio system’s volume, and turn
off the equalizer of the audio system
when using the equalizer of an

iPod

• When not using

iPod

with car audio,

detach the

iPod

cable from

iPod

Otherwise,

iPod

may remain in

accessory mode, and may not work
properly.

procarmanuals.com

Summary of Contents for H-1 i800 2016




































































































































































































































































































































































































































Search results

Summary of Contents for H-1 i800 2016

Reviews:

Related manuals for H-1 i800 2016

Brands by name

Popular brands

Hyundai H-1 i800 2016, Owner'S Manual

Search results

Summary of Contents for H-1 i800 2016

Reviews:

Related manuals for H-1 i800 2016

Brands by name

Popular brands