6- 28
DO-IT-YOURSELF MAINTENANCE
the center of headlights.
SPECIFICATIONS:
"H"
Horizontal center line of headlights
from ground.
: 26.8 in.(656 mm)
"W"
Distance between each headlight
center.
: 43.3 in. (1,100 mm)
"L"
Distance between the headlights
and the wall that the lights are tested
against.
: 118 in. (3,000 mm).
G270A01TB-EAT
REPLACING LIGHT BULBS
Headlight Bulb
In the event of bulb failure being expe-
rienced, ensure that the relative lighting
circuit is turned off prior to attempting to
replace the bulb. The illustrations on
the following page will assist in locating
and removing the various bulbs. En-
sure that the replacement bulb has the
same cap configuration and wattage as
the original.
!
CAUTION:
Keep the lamps out of contact with
petroleum product, such as oil, gaso-
line, etc.
If the vehicle has had front body re-
pairer and the headlight assembly has
been replaced, the headlight aiming
should be checked using the aiming
screen as shown in the illustration. Turn
on the headlight switch. (Low Beam
Position)
1. Adjust headlights so that main axis
of light is parallel to center line of the
body and is aligned with point "P"
shown in the illustration.
2. Dotted lines in the illustration show
G290B01TB-EAT
Adjustment After Headlight As-
sembly Replacement
G290B01L
L
W
H
H
Cut-off line
Ground
line
"P"
Horizontal line
0.59in. (15mm)
1.18 in. (30mm) Vertical line
