Hyundai ELANTRA 2020, Quick Reference Manual

Page: 25 / 28

Quick Reference Guide I 44 43 I Quick Reference Guide
ELANTRA
HYUNDAI
DRIVING
Please refer to your Owner's Manual for more information.
MODE MODE
MODE
MODE
MODE MODE
RES
CNCL
SET
RES
CNCL
SET
MODE MODE
MODE
MODE
MODE MODE
RES
CNCL
SET
RES
CNCL
SET
CRUISE CONTROL/SMART CRUISE CONTROL
MODE MODE
MODE MODE
MODE MODE
RES
CNCL
SET
RES
CNCL
SET
MODE
MODE
MODE
MODE
MODE MODE
RES
CNCL
SET
RES
CNCL
SET
2
3
1
4
Setting Vehicle Distance
(Smart Cruise Control only)
The Cruise Control system allows
you to program the vehicle to
maintain a constant speed without
holding the accelerator pedal.
1 2
3
This system assist you in setting the
distance from the vehicle ahead and
will maintain the selected distance
without you depressing the accelerator
or the brake pedal.
1 To turn On/Off cruise control.
2
Toggle switch UP to Resume or
Increase the cruise control speed.
3 Toggle switch DOWN to Set or
Decrease the cruise control speed.
4 To Pause the Cruise Control
Press the button to set and maintain the
vehicle-to-vehicle distance without pressing
the accelerator or brake pedal.
The vehicle-to-vehicle distance
1
will
automatically activate when you set the
cruise speed
2
.
Each time the button is pressed, the vehicle-
to-vehicle distance changes as follows:
Distance 2
Distance 3 Distance 4
Distance 1
Setting Cruise Control
1. Press the “CRUISE” button
1
to turn on Cruise Control. The icon will
illuminate in the instrument cluster.
2. Toggle “-SET” switch (3) DOWN to set cruising speed.
Adjusting the vehicle speed
1. Toggle “+RES” switch
2
UP to increase cruising speed.
2. Toggle “-SET” switch
3
DOWN to decrease cruising speed.
NOTE:
Quick toggle up/down will change speed by 1 mph. Holding
switch up/down will change speed by 5 mph.
To Cancel Cruise Control
Press the “CRUISE” button
1
or depress the brake pedal.
LEADING VEHICLE DEPARTURE ALERT
HIGHWAY DRIVING ASSIST (HDA) (if equipped)
The Leading Vehicle Departure Alert system alerts the driver of the
departure of the vehicle in front when the vehicle is stopped and the
Smart Cruise Control (SCC) is in activation.
The Highway Driving Assist (HDA) system
helps keep the vehicle between lanes,
maintain a distance with the vehicle ahead,
and automatically adjusts the vehicle speed
to the speed limit while driving on the highway.
With the Engine Start/Stop button in the ON or
START position, the Highway Driving Assist
can be activated from the Settings menu in
the infotainment system screen by selecting
the following:
'Setup → Vehicle Settings → Driver Assistance →
Highway Driving Assist' Deselect the setting to
turn off the system.
To activate
Select the following items on the instrument cluster in order:
1. Select User Settings on the cluster LCD display.
2. Select Driver Assistance
3. Select Driver Attention Warning
4. Select Leading Vehicle Departure Alert
The system stops operation when the setting is deactivated.
However, if the engine is turned off then on again, the system
maintains in the previous state.
NOTE:
If the engine is
turned off then on again,
the system maintains
the last setting.
Operating Conditions:
• Driving on the highway main line.
• Smart Cruise Control is operating.
- If the Smart Cruise Control is in the READY state the Highway
Driving Assist will be in the READY state. The indicator on the
cluster will illuminate white.
• Vehicle speed is under 95 mph (153 km/h).
If all the mentioned conditions are satisfied, the system is ENABLED
and the indicator on the cluster will illuminate green.