EN - 62
troUbleshooting
If you experience problems with this receiver or its installation, in the first instance please read
carefully the relevant sections of this User Manual and this Troubleshooting section.
Porblem
Possible cause
What to do
Standby light not lit
Mains lead unplugged
Check mains lead
Mains fuse blown
Check fuse
No signal found
Aerial is disconnected
Aerial is damaged/misaligned
Check aerial lead
Check aerial
Out of digital signal area
Check with dealer
No picture or sound
Viewing incorrect SCART
output
Press the DTV/VCR button
Turned to digital teletext
channel
Retune to another channel
Mosaic blocks in picture
blocks or picture freezes
Aerial may not be compatible Check aerial
Scrambled channel message Channel is scrambled
Select an altrnative channel
Forgotten channel lock code
Re-instal channels to cancel
channel lock
No response to remote control
Receiver off
Plug in and turn on receiver
Handset not aimed correctly
Aim handset at front panel
Front panel obstructed
Check for obstruction
Remote control batteries are
inserted correctly
Check batteries direction
Handset batteries exhausted
Repleace remote control
batteries
After moving the receiver to
another room, find can´t recei
-
ve the digital reception
The aerial feed may come
trought a distribution system
which may reduce the digital
signal now received by the
receiver
Try a direct feed from the
antenna
Summary of Contents for DVBT218PVR
Page 67: ...Pozn mky Notes...
