Hyundai DV2X212U, Instruction Manual

Page: 70 / 104

EN - 70
Note: During the ZOOM function, slide show transitions and image rotation are disabled.
Q off: close zoom, press PLAY again to resume slide show transition mode.
Troubleshooting Other
If you have any questions, please consult the troubleshooting guide below.
NO PICTURE OR SOUND
• Ensure the power button is on.
• Ensure the power outlet is operational.
• Ensure the power cord is not damaged.
• Ensure the power plug is connected firmly to
the outlet.
PICTURE BUT NO SOUND
• Ensure the audio jacks are securely con
nected.
• Ensure the audio connector is not damaged.
• Ensure the volume is turned up in VOL/CH
setup.
• Ensure you have set the player‘s AUDIO set-
tings correctly.
• Ensure you have entered the correct AV input
for your TV.
• Ensure the audio is not set to mute.
SOUND BUT NO PICTURE
• Ensure the video jacks are securely con-
nected.
• Ensure you have entered the correct AV input
for your TV.
• Ensure the video connector is not damaged.
• Ensure you have set the player‘s VIDEO set-
tings correctly.
POOR PICTURE OR SOUND
• Ensure you have set the player‘s AUDIO set
tings correctly.
• Ensure the disc is not scratched or stained.
• Ensure the AV connector or the output termi-
nal is not damaged.
„BAD DISC“ DISPLAYED
• Ensure the disc is not warped, damaged or
deformed.
• Ensure the disc is not badly stained or
damaged.
• Ensure the disc format is compatible with the
player.
• Please check whether you have tried to
play a software CD. If so, please restart
the player.
REMOTE NOT WORKING
• Make sure the Main unit‘s POWER button is
on
• Ensure the remote batteries are working.
• Point the remote control directly at the
player‘s IR sensor.
• Remove any obstacles betwe en the remote
and the IR sensor.
UNIT NOT WORKING
• Turn off the power, and then turn it on again.
„NO DISC“ DISPLAYED
• Ensure you have put the disc on the tray.
• Ensure the disc is not upside down.
• Ensure the disc is not distorted, stained or
scratched.