EN - 68
3 VIDEO SETUP PAGE
3.1 VIDEO OUTPUT
CVBS: Set video to output via the composite output.
YUV: Set video output in analog component video format when the component video outputs
are used.
P_YUV:Set video output as progressive YUV signals if the component video outputs are used.
RGB: Set video output in Red/Green/Blue format if the SCART output is used.
P_RGB: Set video output as progressive RGB signals if the SCART output is used.
NOTE: If the video setting differs from the physical video connection, the TV set may have poor
picture. You are supposed to press [V-MODE] on the remote control repeatedly to switch to an
appropriate video output mode.
3.2 COLOR SETTING
3.2.1 ShARPNESS
There are three options (HIGH, MEDIUM and LOW) for you to choose in this item.
3.2.2 BRIGhTNESS, CONTRAST, hUE AND SATURATION
Enter these items respectively, use direction key [←]/[→] to adjust the value, then press [EN
-
TER] to confirm it.
3.2.3 GAMMA
There are four options (HIGH, MEDIUM, LOW and NONE) for you to choose in this item.
3.2.4 LUMA DELAY
There are two options (0T and 1T) for you to choose in this item.
3.3 FONT SIzE
Choose your preferred font size for the English subtitles in this setting item.
3.4 FONT COLOR
Choose your preferred font color for the English subtitles in this setting item.
3.5 FONT BACK COLOR
Choose your preferred background color, transparent or black, for the English subtitles in this
setting item.
NOTE:
Setting entries FONT SIZE, FONT COLOR and FONT BACK COLOR apply for MPEG4
disc.
Summary of Contents for DV2H378DU
Page 77: ...Pozn mky Notatky Notes...
Page 78: ...Pozn mky Notatky Notes...
Page 79: ...Pozn mky Notatky Notes...
Page 80: ...Seoul Korea...
