Hyundai DHY6000SE/LR, Manual Manual

Page: 14 / 24

14
- Connect the positive and negative charging lead clips to the correct poles of the battery.
- If you try to charge a large capacity battery, which is at a low voltage, excessive current
flow may occur. This may result in the fuse for the 12v DC blowing.
- Do not use 12V DC and 230V AC at the same time.
Battery Charging
- Battery vents contain explosive gas. For this reason, keep sparks, flames and cigarettes
away from the battery. To prevent from creating a spark near the battery always connect
the charging cables to the battery first and only then to the generator. When disconnecting,
you should disconnect the cables at the generator first.
- Charge the battery in a well ventilated area.
- Before charging, remove the cap from each cell of the battery and ensure the electolyte
level is correct.
- Stop charging if the electrolyte temperature exceeds 45⁰C.
6.3 Electrical appliances, particularly motor driven equipment, will have a very high start-
up current. The table below provides reference for connecting these appliances to the
generator.
Type Wattage Typical
Appliance Example
Starting Rated Appliance Starting Rated
Lighting X1 X1 Incandescent
lamp or
heating
appliance Incandescent
lamp 1000w 100VA
(w) 100VA
(w)
Heating
appliance
Fluorescent
lamp X2 X1-1.5 Fluorescent
lamp Fluorescent
lamp 80VA (w) 40 -60VA
(w)
Motor
Driven
Equipment X3-5 X1-2 Refrigerator
or electric
fan Refrigerator
150w 450-
750VA
(w) 150-
300VA
(w)
7. STOPPING THE GENERATOR
1. Disconnect the load from the generator.
2. Turn off the main breaker switch.