Genuine Accessories
4
Step Ladder and Tape Measure
N
O
T
E
A. Locate the front crossbar.
B. Verify the rounded profile of the crossbar faces forward for proper orientation as shown.
C. Carefully place the front crossbar onto the roof side rails. Ensure the crossbar brackets wrap around the roof rails as shown.
D. Position the front crossbars' foot front rubber edge 29" (740mm) from the forwardmost edge of the roof side rail on both sides of the vehicle as shown.
For Reference:
The front crossbar is positioned 4" (100mm) rearward of the vehicle's B-pillar (door edge).
E. Locate the rear crossbar.
F. Verify the rounded profile of the crossbar faces forward for proper orientation as shown.
G. Carefully place the rear crossbar onto the roof side rails. Ensure the crossbar brackets wrap around the roof rails as shown.
H. Position the rear crossbars' foot front rubber edge between 27.6" (700mm) minimum and 33.5" (850mm) maximum from the edge of the front crossbars' foot forward rubber
edge on both sides of the vehicle as shown.
CAUTION:
Placing the rear crossbar beyond 29.5" (750mm) from the front crossbar may affect vehicle antenna reception.
PIO Technicians Only:
Position the rear crossbars' foot front rubber edge 29.5" (750mm) from the edge of the front crossbars' foot forward rubber edge on both sides of the
vehicle.
Do NOT scratch or damage the vehicle.
N
O
T
E
Do NOT scratch or damage the vehicle.
A. Locate the front crossbar.
B. Verify the rounded profile of the crossbar faces forward for proper orientation as shown.
C. Carefully place the front crossbar onto the roof side rails. Ensure the crossbar brackets wrap around the roof rails as shown.
D. Position the front crossbars' foot front rubber edge 25.2" (640mm) from the forwardmost edge of the roof side rail on both sides of the vehicle as shown.
For Reference:
The front crossbar is positioned inline with the vehicle's B-pillar (door edge).
E. Locate the rear crossbar.
F. Verify the rounded profile of the crossbar faces forward for proper orientation as shown.
G. Carefully place the rear crossbar onto the roof side rails. Ensure the crossbar brackets wrap around the roof rails as shown.
H. Position the rear crossbars' foot front rubber edge between 27.6" (700mm) minimum and 33.5" (850mm) maximum from the edge of the front crossbars' foot forward rubber
edge on both sides of the vehicle as shown.
PIO Technicians Only:
Position the rear crossbars' foot front rubber edge 29.5" (750mm) from the edge of the front crossbars' foot forward rubber edge on both sides of the
vehicle.
I. Skip to step 5.
3
Step Ladder and Tape Measure
5560668001
Revision Date
01/28/2021
Page 4 of 6
