ENG
ENG - 129
ANTI-THEfT SYSTEM
This uni t is designed wi th a f l ip-down detachable panel.
The panel can be detached and taken with you, helping to deter theft. To detach the front panel,
perform the following steps:
Remove the Panel
1) Press to switch off the power of the unit.
2) Press to flip down the panel.
3) Grasp the right side to release the front panel and then pull it at an angle to remove the right
side from the chassis.
4) Store the front panel in the supplied carrying case to protect it from dirt and damage, and
take it with you to prevent theft.
Re-attach the font Panel
1) With the panel laying flat (in the “open” position), insert the left side of the panel in place
until correctly engaged.
2) Gently press the right side of the panel until the mechanism locks it into place.
3) Lift upward to close the panel.
Remove the Unit
1) Remove the panel and the trim plate.
2) Remove the trim ring by firmly grasping one side and pulling.
3) Insert the removal keys straight back until they lock, then pull the radio out. If the removal
keys are inserted at an angle, they will not lock properly and will not release the unit.
Summary of Contents for CRMD 7222 SU
