Hyundai CRM1231R, Instruction Manual

Page: 49 / 68

ENG
ENG - 49
Setting the Clock
The correct time of day can be set by pressing and holding the DISP button.
To set the clock, perform the following steps:
Turn the vehicle ignition and radio on.
Press the DISP button to view the clock.
With the clock visible on the display, press and hold the DISP button until the time display
flashes.
Within 5 seconds, rotate the VOL/MENU control counter clockwise to adjust the minutes to
the desired setting. To change the hour, rotate the VOL/MENU control clockwise to adjust
the hour to the desired time.
CD PLAYER OPERATION
Inserting a Disc
With the label surface facing up, fully insert a compact disc into the disc slot until the mecha -
nism engages and pulls the disc in. Play will automatically begin from the first track on the disc.
NOTE: The unit is designed for play of standard 5” (12 cm.) compact discs only. Do not attempt
to use 3” (8 cm.) CD singles in this unit, either with or without an adaptor, as damage to the
player and/or the disc may occur.
Disc Eject Button
Press the eject button to stop disc play and eject the disc. The unit will revert to radio operation.
Discs may be ejected with the vehicle ignition switch on or off. If an ejected disc is not removed
from the disc slot within 10 seconds of being ejected, the disc will be re-inserted automatically.
NOTE: To prevent a disc from accidentally being damaged, always remove the disc from the
unit when disc play is finished.
CD Play/Pause Selector
Press the
4;
button to freeze disc playback. Press
4;
again to resume disc playback.
Seek Up/Next Track
Press the next track
:
button during disc play to select the beginning of the next track.
Seek Down/Previous Track
Press the previous track
9
button during disc play to select the beginning of the current track.
Press twice to select the beginning of the previous track.
Cue/Review Functions
High-speed audible search to any section of the disc can be made by the Cue and Review fun -
ctions. Press and hold the next track
:
button to advance rapidly in the forward direction or the
previous track
9
button to advance rapidly in the backward direction.
Intro Play Selector
During disc play, press the 2/INT button to select “INT ON” and play the first 10 seconds of each
track. Press 2/INT again to select “INT FOLD” and play the first 10 seconds of each track in the
current folder. When a desired track is reached, press the 2/INT button to select “INT OFF” and
play the current track.
Track Repeat Play Select
During disc play, press the 3/RPT button to select “RPT ON” and repeatedly play the selected
track. Press 3/RPT again to select “RPT FOLD” and repeatedly play all tracks in the current
folder. Repeat play will continue until 3/RPT is pressed to select “RPT OFF”.
1)
2)
3)
4)