![background image](http://html1.mh-extra.com/html/hyundai/c19f06110/c19f06110_user-manual_2196181008.webp)
F 910
Perfectly Flat 3D Monitor
4/20
BACK
NEXT
3-2. Fastening the swivel
and tilt base
3-3. Selecting a suitable
location
• Place the base against the bottom of the monitor so that the base fasteners are
aligned with appropriate slots.
• Push the base towards the front of the monitor until the latch locks into
position.
• Place the monitor at least 30cm from other electrical or heat-emitting
equipment and allow at least 10cm on each side for ventilation.
• Place the monitor in a position where no light shines directly onto or is
reflected on the screen.
• To reduce eye strain, avoid installing the display unit against a bright
background such as a window.
• Position the monitor so that the top of the screen is no higher than eye level.
• Position the monitor directly in front of you at a comfortable reading distance
(around 45 to 90cm)
Please set up refresh rate(vertical frequency) as more than 120Hz to
decrease screen flicker coming through 3D glasses on perfrming 3D image.
!