ENG - 22
• If the blanket does not heat, do not repair it by yourself. Please, send it to the technological
service departments of our company or service center for maintenance or check.
• Do not set shift button to “high” when you are going to sleep.
• Do not set the controls for all night use.
• The above instructions must be followed. Otherwise, it will result in overheating or unusually
high temperature because of improper use of the electric blanket. That can lead to fire, cause
bodily injury and property loss.
• The environment temperature should be no more than 40 degrees.
• The blanket has a pollution-free electromagnetic radiation shield technology to protect the
human body from electromagnetic wave radiation.
• Use only with a blanket control unit (controller), which it is intended.
CONTROLS DESCRIPTION
P1
Remote control
P2
Main switch
P3
LED display
P4
TEMP button - for temperature setting
P5
TIMER button - for operatin time setting
INSTRUCTION FOR USE
The product features a multi-temperature
adjustable control, which distinguishes it from other electric blankets that are limited to only two
grades: high and low. You can choose the most comfortable temperature. The electric blanket is
not merely suitable for getting warm in winter, and is suitable for cold moist rainy areas.
• Lay the electric blanket flat on the bed. The end without controls is the foot end. Put only spread
sheets on the blanket, so as to help the conduct of the heat and check whether the electric
blanket is not creased. Lay the quilt flat on the sheet to use the electric blanket safely.
• General temperature adjustment: Plug power cord into an AC230 V - 50 Hz wall outlet (do not
connect this appliance with Daily Clock timer).
• To operate, you can choose different temperatures 1-9 and 1-9 hours timer or the maximum
choice 12 hours.
• Main switch turn to position 1
• LED lights display. Press TIMER to set the time on and pressing the „TEMP“ to desired
temperature.
• When LED shows” H” , it means 12 hours timer.
Summary of Contents for BHB 120
Page 36: ......
