1-26 APPENDIX
Problem
Possible Cause
Solution
The sound does not work.
The volume level is set at the lowest level.
Adjust the volume level.
The connector is not properly connected.
Check the connection state.
The device is currently fast-forwarding,
rewinding, scanning, or playing in slow mode.
The sound will not work when the device is fastforwarding,
rewinding, scanning, or playing in slow mode.
The sound or video quality is
low.
The DISC is dirty or scratched.
Wipe off water or dirt from the DISC. Do not use a disc which
has been scratched.
Vibration is occurring from the position in
which the conversion switch has been
installed.
The sound may be short-circuited and the image distorted if
the device begins to vibrate. The device will return to normal
operation once the vibration has stopped.
The color and tone quality of the image is
low.
Aging of the video display and deterioration in performance
may cause certain degradations in quality.
Subtitles do not work.
Subtitles are not included in the currently
playing DVD.
The subtitles cannot be played.
The subtitle language has been set to "OFF".
Set the subtitle language on the desired language.
Subtitles do not turn off.
The DVD currently being played has disabled
the hide subtitle function.
The subtitle cannot be turned off.
The sound or subtitle
language does not change.
Only one language is included in the
currently playing DVD.
The language cannot be changed if the DISC does not
support multi-languages.
The currently playing DVD only supports one
language.
The language cannot be changed.
The selected sound or subtitle
language cannot be used.
A language which is not supported by the
currently playing DVD has been selected.
A language not supported by the DVD cannot be played.
6. APPENDIX
