manualshive.com logo in svg

Hyundai 2005 Santa Fe, Owner'S Manual

The 2005 Hyundai Santa Fe Owner's Manual is available for download free on manualshive.com. This comprehensive manual provides detailed instructions and information about your Hyundai Santa Fe, allowing you to better understand and maintain your vehicle. Get your manual now and unlock the full potential of your Santa Fe.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

112

H260B04O-AAT

1. POWER ON-OFF Control Knob

The radio unit may be operated when the ignition
key is in the "ACC" or "ON" position.  Press the
knob to switch the power on. The LCD shows
the radio frequency in the radio mode or the CD
track indicator in the CD mode. To switch the
power off, press the knob again.

VOLUME Control

Rotate the knob clockwise to increase the
volume and turn the knob counterclockwise to
reduce the volume.

BALANCE Control

Pull and turn the control knob clockwise to
emphasize right speaker sound (left speaker
sound will be attenuated). When the control
knob is turned counterclockwise, left speaker
sound will be emphasized (right speaker sound
will be attenuated).

2. FAD (Fader Control) Knob

Turn the control knob counterclockwise to
emphasize front speaker sound (rear speaker
sound will be attenuated). When the control
knob is turned clockwise, rear speaker sound
will be emphasized (front speaker sound will be
attenuated).

3. BASS Control Knob

Press to pop the knob out and turn to the left or
right for the desired bass tone.

TREB (Treble Control) Knob

Pull the bass control knob further out.
Turn to the left or right for the desired treble tone.

4. SCAN Button

When the scan button is pressed, the frequency
will increase and the receivable stations will be
tuned in one after another, receiving each sta-
tion for 5 seconds. To stop scanning, press the
scan button again.

5. TUNE (Manual) Select Button

Press the (   ) side or (   ) side to increase or to
decrease the frequency. Press either button
and hold down to continuously scroll.
Release button once the desired station is
reached.

SEEK Operation
(Automatic Channel Selection)

Press the TUNE select button for 0.5 sec or
more. Releasing it will automatically tune to the
next available station with a beep sound.
When the (   ) side is pressed longer than 0.5
second, releasing will automatically tune to the
next higher frequency and when the (   ) side is
pressed longer than 0.5 second, releasing will
automatically tune to the next lower frequency.

6. BAND Selector

Pressing the              button changes the AM, FM1
and FM2 bands. The mode selected is dis-
played on LCD.

7. PRESET STATION SELECT Button

Six (6) stations for AM, FM1 or FM2 respec-
tively can be preset in the electronic memory
circuit on this unit.

FM/AM

Summary of Contents for 2005 Santa Fe






















































































































































































































































































Reviews:

No comments

Related manuals for 2005 Santa Fe

LaserTrack Flare Installation Manual preview
Flare
Brand: LaserTrack Pages: 12
A-Tach Mounts 50131 Instructions preview
50131
Brand: A-Tach Mounts Pages: 2
VanEssa mobilcamping V1 User Instruction preview
V1
Brand: VanEssa mobilcamping Pages: 8
Jeep PATRIOT 2013 Specifications preview
PATRIOT 2013
Brand: Jeep Pages: 5
Jeep PATRIOT 2012 Specifications preview
PATRIOT 2012
Brand: Jeep Pages: 6
Jeep Grand Cherokee SRT 2014 Operating Manual preview
Grand Cherokee SRT 2014
Brand: Jeep Pages: 345
Jeep Grand Cherokee 2015 User Manual preview
Grand Cherokee 2015
Brand: Jeep Pages: 236
Jeep Grand Cherokee Quick Manual To Repairs preview
Grand Cherokee
Brand: Jeep Pages: 18
Jeep Grand Cherokee Quick Reference Manual preview
Grand Cherokee
Brand: Jeep Pages: 24
Jeep Compass 2015 Owner'S Manual preview
Compass 2015
Brand: Jeep Pages: 560
Jeep Compass 2013 Owner'S Manual preview
Compass 2013
Brand: Jeep Pages: 525
Jeep Cherokee 2019 User Manual preview
Cherokee 2019
Brand: Jeep Pages: 308
Jeep CHEROKEE 2017 Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 86
Jeep CHEROKEE 2017 Owner'S Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 638
Jeep 2022 CHEROKEE Quick Start Manual preview
2022 CHEROKEE
Brand: Jeep Pages: 9
Jeep 2014 Patriot Service Information preview
2014 Patriot
Brand: Jeep Pages: 51
Jeep Jeep Wrangler Buyer'S Manual preview
Jeep Wrangler
Brand: Jeep Pages: 4
Jeep Jeep Wrangler Owner'S Manual Supplement preview
Jeep Wrangler
Brand: Jeep Pages: 50

Brands by name

Popular brands

Load more brands