Hyundai power products HYPS5200X Instruction Manual Download Page 38

www.hyundaipowerproducts.co.uk

01646 687 880

[email protected]

Maintenance

Short Term Storage

After use, please follow the below steps before storing your machine.

Storage

Allow the engine to fully cool down.

1

Clean the machine. See the ‘Cleaning’ section.

2

Store the machine following the guidelines above.

3

Where To Store

!

       Store in a cool, dry place away from sources of ignition and varying changes in temperature.

       DO NOT stack other items on top of the machine when in storage. The protectors must be 
fitted for transport and storage

       Store the machine in a safe place, out of the reach of children or anyone who is not familiar  
with operation.

      To reduce fire hazards, keep the engine, silencer, and petrol storage area free of grass, 
leaves, or excessive grease. Do not leave containers full of cut grass inside storage areas.

       DO NOT store the machine with fuel in the tank in an area where the fuel vapours could reach 
an open flame, a strong heat source or a spark. 

      DO NOT store a machine that has not been given time to fully cool down. Engine must be 
cooled down fully before storage.

!

!

!

!

!

  38

Long Term Storage

If storing the machine for a period of 30 days or more, you must follow proper storage and 
winterisation guidelines to avoid any possible issues with the machine. Incorrect storage can lead 
to possible fueling or engine issues that will not be covered by the warranty.

Allow the engine to fully cool down.

1

Drain all the fuel from the fuel tank and then run the machine until it has completely run out of 
fuel to clear the remaining fuel from the fuel lines and carburettor.

2

Follow the cleaning instructions in the ‘Cleaning’ section.

3

Follow the maintenance section and check, service or replace serviceable items if required.
Visually inspect the machine and replace or repair any worn parts. Check the blade and sharpen 
or replace if necessary.

4

Remove the spark plug. Add 1 teaspoon of 2-stroke oil to the combustion chamber. Pull the
starter pull cord several times to wet all mechanical parts with oil. Replace the spark plug.

5

Summary of Contents for HYPS5200X





















































Reviews: