Hyundai power products HYM3800E, Instruction Manual

Page: 9 / 36

9
General Safety
2. Use Safety Equipment. Always wear eye
protection. Safety equipment such as dust
mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate
conditions will reduce personal injuries.
3. Avoid Accidental Starting.
Ensure the
switch is in the off position before plugging in.
Carrying power tools with your finger on the
switch or plugging in power tools that have
the switch on invites accidents.
4. Remove adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power
tool may result in personal injury.
5. Do Not Overreach. Keep proper footing
and balance at all times. This enables better
control in unexpected situations.
6. Dress Properly.
Do not wear loose
clothing or jewellery; keep your hair,
clothing and gloves away from moving parts.
Loose clothes, jewellery or long hair can be
caught in moving parts.
7.If dust extraction and collection equipment
can be installed, make sure they are
connected and used properly. Using a dust
extractor can reduce dust hazards.
1. Do Not Force The Tool.
Use the correct
power tool for your application. The correct
power tools will do the job better and safer at
the rate for which it was designed.
2. Do Not
use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
3. Disconnect the plug from the power source
before making any adjustments, changing
accessories, or storing power tools. Such
Power Tool Use And Care
!
preventive safety measures reduce the risk of
starting the power tool accidentally.
4. Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
5. Maintain power tools, check for
misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the power tools operation. If
damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
6. Use the power tool, accessories and tool
bits etc., in accordance with these instructions
and in the manner intended for particular type
of power tool, taking into account the working
conditions and the work to be performed. Use
of the power tool for operations different from
intended could result in a hazardous
situation.
7. Before use check the supply and extension
cord for signs for signs of damage or aging.
8. If the cord becomes damaged during use,
disconnect the cord from the supply
immediately.
9. WARNING: Cutting elements continue to
rotate after the motor is switched off.
10. Check plug and cable for damage before
inserting the plug into the socket. If damaged,
have it replaces by a specialist immediately.
Damaged cables and plugs or connection
cables that do not comply with the regulations
must not be used.
11. Only insert the plug into the socket when
the machine is switched off.