background image

  31

8. Once all work above is carried out store the 
machine in a clean, cool and dry place away 
from sources of ignition and varying changes 
in temperature. DO NOT store a 
machine that has not been given time to fully 
cool down. Store away from potential sources 
of ignition, such as furnaces, hot water boilers 
with gas, etc.

1. 

Whenever the machine is to be handled, 

lifted, transported or tilted you must:
- Wear sturdy work gloves
- Hold the machine at the points that offer a 
safe grip, taking into account the weight and 
relative distribution of the same
- Use an appropriate number of people for the 
weight of the machine and the characteristics 
of the vehicle or the place where it must be 
placed or collected
- You must make sure that machine 
movements do not cause fuel leaks, damage 
or injuries.

2.

 During transport, make sure to fasten the 

machine securely with cables or straps.

3. Leave the machine to cool down before 
transporting.

4. Turn off the engine even for short distances.

5. The fuel tank must be emptied completely 
before transport.

Maintenance & Care

!

You must follow these guidelines for storage:

       Store in a cool, dry place away from
sources of ignition and varying changes in
temperature.

       DO NOT store a machine that has not been
given time to fully cool down. Engine must be 
cooled down fully before storage.

       DO NOT stack other items on top of the
machine when in storage.

       DO NOT store the machine with fuel in the 
tank in an area where the fuel vapours could 
reach an open flame, a strong heat source or a 
spark. 

      Store the machine in a safe place, out of 
the reach of children.

      Store the machine safely so that nobody 
can get injured by the machine or put it into 
operation.

!

!

!

!

1. Remove spark plug

2. Pull starter rope briskly to clear excess oil 
from combustion chamber.

3. Clean the spark plug and check that the 
electrode gap is correct.

4. Prepare unit for operation.

5. Fill fuel tank with proper fuel/oil mixture.

!

After Storage

Transportation & Handling

Summary of Contents for HYEA5200X









































Reviews: