Hyundai power products HNHP2470, Operator'S Manual, Page: 30 / 48

• Improper transport of the machine may result accidents
and injuries.
• During use, transportation, assembly, dismantling when
out of service, testing or foreseeable breakdowns, the tool
must keep always stand up.
• Do not use the tool where dangerous situations or acci-
dents may occur. Do not use it indoor, in places where are
exhausted gases, etc.
• In case of accidents or breakdowns, stop to use the tool,
switch off it and unplug it. Check the conditions of the tool
and bring it to a service agent for inspection and reparation
if necessary.
• When opening the trigger gun, pay attention to the kick-
back force. The power of the gun can cause a kickback and
can produce a loss of control of the gun and create acci-
dents and injuries. Hold the gun firmly, and with both hands
if possible.
• WARNING Always switch off the mains disconnecting
switch when leaving the machine unattended.
• Means for disconnection must be incorporated in the fixed
wiring in accordance with the wiring rules.
Intended Use
Your PRESSURE CLEANER can perform a myriad of tasks
in the house and in the garden. It effectively cleans a wide
variety of surfaces.
Your PRESSURE CLEANER is designed to operate from a
cold water supply. It operates efficiently with water whose
temperature is between 5 and 60 degrees.
Your PRESSURE CLEANER has been designed for outdoor
use only on materials such as stone, wood and plastics.
Please check, before use, whether materials can be cleaned
with your sprayer; the manufacturer cannot be held respon-
sible for any damage resulting from improper use.
6