6
Connect the generator to earth. Use a sufficiently thick conductor for the earth wire.
Do not operate the generator in parallel with another generator.
If using electrical extensions, make sure that they are sufficiently thick to transport the
current and that they are used correctly.
The connection of a generator used for auxiliary power to the electrical installation
of a building must be performed by a qualified electrician, and in conformity to the
provisions of the applicable laws and norms in the field of electricity. Incorrect
connections will cause leakage of the current from the generator into the lines of the
public electricity company. Such leakage could electrocute the workers of the public
electricity company working on the network or other persons in contact with the line
during a power cut. Also, when the public power supply is re-established, the generator
can explode, catch fire or generate fires in the building’s electrical installation.
Before connecting electrical devices to the generator, make sure that their
voltage specifications and frequency of functioning correspond to the technical
characteristics of the generator. There may be damage if the device connected is not
designed to function with a voltage tolerance of +/- 10% or a frequency tolerance of +/-
3 % compared with those of the generator.
Protection of the environment
You must periodically check the silencer (Before doing this, switch off the generator and
let it cool completely). A damaged silencer increases noise.
Do not throw motor oil into the drains but deposit it at a collection point set up for that
purpose.
The fuel for this machine is combustible and explosive. After stopping the machine, you
must handle the remaining fuel correctly and meet local environmental requirements.
Symbol explanation
Attention!
Please read the manual carefully before using the unit!
Conforms to relevant safety standards
