6
c) Move the rotating blade gently towards the object to be cut, gradually increasing the pressure once the
cutting edges contact the object. Make sure the depth of cut is appropriate.
d) Avoid changing direction or turning while cutting as this may place a large torsional load on the blade
and cause it to fail. Only move the machine in a straight line, forward and / or backward in the cutting
direction.
e) When cutting, keep a distance between your body and the saw; Make sure your body does not meet the
rotating parts.
f)
Release the pressure on the saw when the blade finishes cutting. The cut portion of the object may fall
off, so avoid it crushing you or bending the saw.
g) Whenever you hear abnormal sound from the Concrete Cutter, immediately stop cutting and inspect
(Note: Muffler and blade are very hot currently). Only start working again when the problem is resolved.
h) Avoid making any adjustments, maintenance or troubleshooting while the machine is running.
i)
Take care when resuming a cut or when turning the blade at an angle. You should also be careful of the
pressure exerted on the blade so as not to damage it.
7. Fuel refueling precaution
a) Refuel the machine only in a well-ventilated environment.
b) Before refueling, allow the engine to cool naturally. Avoid taking measures to speed up the cooling of
the engine.
c) Carefully remove the fuel tank cap to allow any pressure stuck in the tank to release slowly.
d) Tighten the fuel cap securely after refueling and clean up any leaks.
e) Do not smoke while refueling.
f)
Do not bring any source of ignition during refueling.
g) Be careful of fuel spills and ignition of fire by sparks when cutting. In the event of a spill, stop work, clean
the area and the machine. Make sure the area is safe before starting over.
8. Notes on transport
a) Always stop the engine before repositioning the saw.
b) When transporting the machine, avoid getting burned by the muffler.
c) Be careful that the saw does not touch the ground or hard objects.
9. Notes on maintenance
a) Perform maintenance or repair work in a clean and tidy environment. Use clean tools and operate with
care.
b) Avoid modifying the disc in any way. Use only identical spare parts.
c) The Concrete Cutter is intended for cutting work only and should not be used to spread or lift objects, or
as a tool for grinding with the sides of the blade.
10. Storage
a) Ensure maintenance and cleaning before storing the machine.
b) Store the machine out of the reach of children in a dry place. It is recommended to place it in its box.
