lever to the ON position (
Pic.12
) (12.1).
When the engine is running, the speed can be adjusted by moving the throttle control
lever (
Pic.13
) (13.1) to the high (indicated by a hare), medium or low position (indicated by
a tortoise).
To stop the chipper/shredder:
To stop the engine, turn the engine ON/OFF switch to the OFF position (
Pic.14
) (14.1).
When the engine has stopped and before storage, turns the fuel lever to the OFF position
as shown in
Pic.15
(15.1).
To shred twigs, leaves, and brush:
1. Slowly pour the material into the hopper. DO NOT try to stuff too much material in at
one time or the machine will jam.
2. Use a branch to push the material into the hopper if necessary (see
Pic.16
). DO NOT
use your hands!
