DALI + sensorDIM + 1-10V + switch-Dim. + RF wireless, multi-current LED driver!
This Hex-Drive is
a multi-task hex-functional LED driver. Save space, save cost, save wiring, save assembly, save inventory and save trouble!
2~50Lux
6
0
6
Detection Pattern
Ambient daylight
threshold
Hex-Drive
T M
CONSTANT CURRENT
Driver Mechanical Structure
433 /868 /
315 /915 MHz
Daylight
Monitoring
further 20%
saving
Model: HED1025 1x25W
T M
T M
L
N
Switch-Dim
DIP switch (for LED
current seclection)
RJ12 (sesor antenna)
LED+
LED -
DALI
DALI
3
254.6
4.2
36
21.5
269
Model: HED1025 HED1050H HED1050L
HED1080H HED1045
manual on
8 hours
DALI + SensorDIM
T M
+ Switch-Dim.+ 1-10V + RF
FLICKER
FREE
100%
60%
40%
20%
80%
thermal management
<0.5W
STD-BY
DALI
RJ12 sensor antenna
1-10V+
1-10V -
LED
424
413.5
40.5
22
4.5
DIP switch (for LED
current seclection)
+
LED-
DALI
Switch-Dim
Model: HED1050H 1x50W high current
HED1050L 1x50W low current
HED1080H 1x80W high current
Mains voltage
Mains current
Mains power
Output voltage(U-out Max.)
Power factor
Operation temperature
Battery charge voltage
Battery pack
Battery duration
Over-heat protection
EMC standard
Safety standard
Certification
Dielectric strength
IP grade
220~240VAC 50/60Hz
75VDC
0.75
0~+50
℃
Over-heat protection with auto-reset.
EN55015 , EN61547
EN50172, EN61347-2-7, EN61347-2-13 , IEC62034 ,BS5266
Semko,CB, CE , EMC
Input
→
output
:
3750VAC
IP20
13mA - 16mA
3.5W
6V~8.5V
BPC05, BPC08, BPC14,
BPC19, BPC20, BPC21
24 hours
75
℃
150VAC~180VAC
3W-- 260mA~40mA (12~70VDC);
6W-- 350mA~80mA (12~70VDC)
150VAC~180VAC
40mA (55VDC)~230mA (12VDC)
1 hour @ 6W/3 hours @3W
3 hours @3W / 1 hour @3W
Battery charge current
200mA (Max.)
220~240VAC 50/60Hz
65VDC
0.75
0~+50
℃
27mA - 17mA
4.5W
3
V
~5.3
V
BPC10, BPC11, BPC15, BPC16
200mA (Max.)
Specification
Output LED current
Mains Switch-over voltage range
Model No.
HEM06-T
HEM07-T
Charge period
Max. case temp.
1. Temperature range for storage (Humidity: Max. 85%)
0 ~ +35
℃
, one year storage
(Storage time will be shortened if out of this temp. range)
2. Storage duration before use: Less than 6 months from batteries received to start with charging.
Note 1: For Ni-Cd battery, we recommend batteries are charged and discharged at least once every 6 months.
Note 2: For Ni-MH battery, we recommend batteries are charged and discharged at least once every 3 months.
Note 3: Never over discharge the battery.
1. Avoid direct soldering onto cells.
2. Use only within the specified working temperature range.
3. Do not subject batteries to mechanical shock.
1. Avoid throwing cells into a fire or attempting to disassemble them. As the electrolyte inside is strong alkaline and can
damage skin and clothes.
2. Avoid short circuiting. It may be leakage.
Cautions In Emergency Battery Usage:
Storage Conditions
Warning
Danger
Hytronik LED driver
29
Hytronik LED driver
30