Hytronik LED driver
25
Hytronik LED driver
26
Model: HEM06-T HEM07-T
Emergency LED Driver
Advanced Version
This emergency lighting module is designed to convert a wide range of LED types, and is an ideal choice for converting most standard LED
luminaires and arrays containing from 4 to 22 ( HEM06-T ) or 4 to 20 ( HEM07-T ) LEDs in series.
This unit is designed to utilize the existing LED driver and panel layout (no need to break into the LED circuit) to be dimmed to 3W/6W in case
of emergency.
The driver can automatically adjust the output LED current to provide the optimum match between the battery and the load, which enables
maximum illumination whilst ensuring full battery duration. The driver is compatible with a wide range of LEDs such as Philips Fortimo DLM, SLM
and LLM ranges, Bridgelux LS/ES/RS ranges, Citizen 4~41W ranges, GE Infusion, Xicato and many others.
Wiring Diagram
Dual Wattage
Emergency Driver
3W
6W
EL -T
Self-testing
Emergency Driver
Emergency
Carrying out routine test on emergency lighting and holding records of the test result is requred by the law. (IEC62034, BS5266, EN50172).
Hytronik advanced LED emergency control model HEM06-T has a internal clock, programmed to interrupt the permanent mains supply at
pre-determined intervals to perform the requested routine testing: 3min. funcitonal test every month, and 1h (3W) & 20min (6W) function test
every 6 months, and 3h (3W) & 1h (6W) function test every 12 months.
------ Self-test starts after the luminaire are connected to mains for continued 48 hours.
------ Auto-commissioning, save manpower and maintenance.
------ Permanently monitors battery and charge condition
------ Dual failure indication: failures are clearly identified on the luminaire by red LED and buzzer.
------ MCU programmed test schedule:
HEM06-T: 3min @ every month;1h (3W) & 20min (6W) @ 6 months; 3h (3W) & 1h (6W) @ 12months.
HEM07-T: Emergency time 3h: 3min @ every month;1h (3W) @ 6 months; 3h (3W) @ 12months. (ex-work defaut value)
Emergency time 1h: 3min @ every month;20min (3W) @ 6 months; 1h (3W) @ 12months.
------ Automatic delayed test in case of power failure at programed testing period.
Self-testing Feature
Highlights
• Deep discharge protection
•
5-Year product warranty
Good compatibility with various brands of LED in the market
• Constant current charger
•
•
High temperature NiMH/Nicd cells
• Automatic output current adjustment
•
•
Wide range of LEDs in series (HEM06-T: 12~70V / HEM07-T: 12~55V)
• With both LED indication and Buzzer warning
• Built-in MCU programed self-testing, maintenance free
• Dual wattage and duration selection:
HEM06-T: 3W @ 3 hrs; 6W @ 1h / HEM07-T: 3W @ 3hrs; 3W @ 1h
Black
Red
Lout
Lin
N
L
LED
Buzzer
+
-
+
-
+
-
+
-
From LED driver
Output to LEDs
Battery supply
Reset
3W output
6W output
150
172.5
180
4.5
40.5
22
53.5
30.5
Mechanical Structure
Model: HEM06-T
Model: HEM07-T
Lin
Red
LED indication
Black
Lout
Buzzer
From driver
Output to LEDs
Battery supply
Reset
Emergency time
selection
Sensor
Connection
On-off
Green
Red
Unswitched
LED Driver
LED
Battery
1.2V
1.2V
1.2V
1.2V
1.2V
1.2V
HEM06-T
From LED
-
+
-
+
-
+
-
Output to LEDs
Battery supply
L
Lin
Lout
Buzzer
Red
Black
LED Indication
N
Reset
Output
3W
6W
