Hytera X1ei, Owner'S Manual

Page: 24 / 38

3
“Click” “Click”
ON OFF
Basic Operations
Turning the Radio On/Off
Initial Registration
Before the radio can make the communication
normally, it needs to register in the system. Once
you turn on the radio, it will start hunting the control
channels for available base station and attempt to
make the registration automatically.
Hunting the Control Channel
The radio starts hunting the control channel for
available base station automatically upon power-on.
During hunting, the LED indicator flashes orange
slowly. There are two hunt plans: Fixed Control
Channel and Flexible Control Channel. You may
request your dealer to set the appropriate plan for
your radio. Please refer to the Feature Description
and Operation Manual along with the product for
details.
Registering
When the radio searches for a control channel, the
radio determines whether the base station allows it
to register. Upon successful registration, the radio
is ready for communication. If you want the radio
to register with another base station, press the
programmed
Manual Current Hunt key to hunt
again.
Note: For smooth registration, it is highly
recommended to put the frequently used
frequencies of base stations in the control
channel list via the dealer.
Adjusting the Volume
You can adjust the volume of output voice, signaling
side tone and channel notification tone by rotating the
Volume Control Knob . For other tones, the volume
will be configured by the dealer.
Selecting a Group Contact
After the radio is registered successfully after power-
on, you can select a group contact through any of the
following methods:
● Knob: Rotate the Group Call Selector Knob to
select an appropriate group contact. An audio
alert will be given in case of no group contact
preset for this knob.
● Shortcut key: If the dealer predefines the
programmed Group Up and Group Down
keys, you can select the group contact in an
ascending way or descending way by using the
keys accordingly.
Call Services
After the radio is powered on and registered, you can
make and receive calls. To ensure an optimal volume
of the receiving radio, keep the microphone about
2.5 to 5 centimeters away from your mouth when
transmitting.
N o t e : I f t h e r a d i o d o e s n o t r e g i s t e r
successfully or you select an empty group
by rotating the Group Call Selector Knob,
the radio cannot initiate any call.
2.5~5.0CM
Private Call
There are two ways to answer the private call:
FOACSU (Full Off Air Call Set-Up) and OACSU (Off
Air Call Set-Up). The specific way is decided by the
settings made for the called radio via the network
management application.
● FOACSU: The called party needs to answer the
call manually.
● OACSU: The called party answers the call
without any operation.
Initiating a Private Call
After initiating a private call (FOACSU call), the radio
will give the ring indication until the called party