Hytera TC-700, Service Manual, Page: 5 / 50

TC-700 Software Specification
4
Software Specification
Specification:
‹
Conventional Mode
1. Mechanical Knob (16 channels)
VHF:136
～
174MHz
UHF:400-470MHz, 450
～
520MHz
2. Channel Spacing: 25/20/12.5KHz (Wide/Medium/Narrow bandwidth compatible)
3. Step: 2.5/5/6.25KHz
4. LED Indicator: Red/Green
5. 3 Programmable Function Keys
6. CTCSS/CDCSS Encode & Decode
7. DTMF Encode
8. 2-Tone (2-Tone version) / 5-Tone (5-Tone version)
9. HDC2400
TM
Encode & Decode
10. HDC1200 Encode & Decode
11. Squelch Mode:
1) Carrier
2) CDCSS/CTCSS
3) Optional Signalling
4) CTCSS/CDCSS AND 2-Tone/5-Tone/ HDC2400
TM
/HDC1200
5) CTCSS/CDCSS OR 2-Tone/5-Tone/ HDC2400
TM
/HDC1200
12. Scan
13. Time-Out-Timer (TOT)
14. Rent
15. Battery Save
16. Emergency
17. PTT ID
18. Busy Channel Lockout & Busy Tone Lockout
Description
1. User Mode
This mode is for normal operation.
2. All Reset Mode
Firstly ground the SELF point, and then turn the power on while holding down TK key for 2 seconds.
The radio enters all reset mode with green LED flashing twice. Turn the channel selector knob to the