Hytera PNC360S, User Manual

Page: 22 / 32

18
2. Press the OK/Menu key to enable Location .
3. Press the Navigation key to select Mode , and then press the OK/Menu key.
4. Select one of the following location modes:
 High accuracy : The radio locates accurately through GPS, WLAN, and cellular network.

Battery saving : The radio locates only through WLAN and cellular network, so as to save battery
power.
 Device only : The radio locates only through GPS without using data traffic.
5. Press the OK/Menu key.
Setting the Scanning Mode
1. Enable Location . For details, see Setting the Location Mode .
2. Press the Navigation key to select Scanning , and then press the OK/Menu key.
3. Select whether to enable the following scanning modes:
 WLAN scanning : Improve location by allowing system applications and service to detect WLAN
network at any time.

BT scanning : Improve location by allowing system applications and service to detect BT devices at any
time.
4.3 System
4.3.1 Language
1. Press the Navigation key to select Languages , and then press the OK/Menu key.
2. Press the Navigation key to select the display language, and then press the OK/Menu key.
4.3.2 Factory Data Reset

The Factory Data Reset feature will erase all information on the radio such as personal information and
downloaded applications.

Ensure that the battery power is above 50% before factory reset.
When the radio runs slowly or the applications quit unexpectedly, you can reset the radio to the factory settings to
fix the problem.