Hytera PD79XIS FM IIB, Owner'S Manual

Page: 20 / 34

1. Rotate the Channel Selector knob to select the
required channel.
2. Press and hold the PTT key, and speak into the
microphone.
Call With Signaling
On an analog channel with signaling, you can initiate a
call to a specific contact on the channel. Do as follows:
1. Rotate the Channel Selector knob to select the
required channel.
2. Press the OK/Menu key, and go to Contact >
Contact List .
3. Select the required contact.
4. Press and hold the PTT key, and speak into the
microphone.
Message Services
The Message feature allows you to send and receive the
following types of messages in trunking mode or on a
digital channel in conventional mode:
l
New messages: messages created using the keypad.
l Quick text messages: frequently used messages
predefined by your dealer but editable.
l
Status messages (trunking only): frequently used
messages predefined by your dealer and not editable.
Viewing Messages
To view a newly received message, directly press the
OK/Menu key.
To view a message from the Inbox, a sent message, or a
saved message , go to Menu > Message >
Inbox / Outbox / Drafts > Inbox List / Outbox List / Drafts
List , and then select the required message.
Sending a Message
Sending a New Message
1. Go to Menu > Message > New Msg , and then type
the text.
2. Press the OK/Menu key, and then select Send .
3. Select the required contact, and then press the
OK/Menu key.
Instead of directly sending the new message, you
can also select Save in conventional mode or select
Save to Drafts or Save to QuickText in trunking
mode to save the new message, and send it later.
Sending a Quick Text Message
1. Go to Menu > Message > Quick Text , and then
select the required quick text message.
2. (Optional) Edit the message, and then press the
OK/Menu key.
3. Select
Send
, and then select the required contact.
4. Press the OK/Menu key.
Sending a Status Message
1. Go to Menu > Message > Status Msg , and then
select the required status message.
2. Press the OK/Menu key, and then select the required
contact.
3. Press the OK/Menu key.
Deleting a Message
To delete a message from the InBox, OutBox, or Drafts,
do as follows:
1. Go to Menu > Message > InBox / OutBox / Drafts >
Inbox List / Outbox List / Drafts List .
2. Select the required message, and then press the
OK/Menu key.
3. Select Delete , and then press the OK/Menu key.
To delete all messages from the InBox, OutBox, or
Drafts, do as follows:
1. Go to Menu > Message > InBox / OutBox / Drafts .
2. Select Delete All , and then press the OK/Menu key.
16