background image

6

Note: For smooth registration, it is highly 
recommended to put the frequently used 
frequencies of base stations in the control 
channel list via your dealer.  

Adjusting the Volume

You can adjust the volume of output voice, side tone 
and channel noti

cation tone by rotating the Volume 

Control Knob. For other tones, the volume will be 
con

gured by the dealer. 

Inputting via Keypad

You can input alias, call numbers and messages via 
the keypad of the radio. Besides, you may need to do 
the following during inputting. 

 

To switch input method: 

 

To input special characters: 

 

To input space: 

Locking/Unlocking the Keypad 

When  the  keypad  is  not  in  use,  you  can  lock  the 
keypad to avoid mishandling. You can lock or unlock 
the keypad through any of the following methods: 

 

Key Combination: Press the OK key and then press 

 

Programmable Key: Press the programmed Keypad 
Lock key preset by your dealer. 

 

Menu  Navigation:  Go  to 

Settings  ->  Radio 

Settings -> Keypad Lock

 to enable or disable the 

feature. 

 

»

Enable: The keypad will be locked automatically 
if there is no radio operation within the preset 
time. After this feature is enabled, you can 
press the 

Up/Down

 key to set the Keypad Auto 

Lock Delay Time. 

 

»

Disable:  The  keypad  will  not  be  locked 
automatically.  However,  you  can  lock  or 
unlock the keypad via the key combination or 
Keypad Lock key mentioned above. 

Selecting a Subgroup 

You can include your desired group call contacts into 
a subgroup for ef

cient management. 

To select a subgroup: Go to the menu 

Subgroup

 

via the Menu or Subgroup key, then use the Up/Down 
key to select an appropriate subgroup. Afterwards, 
select the option 

Set as Default

 and press the OK 

key to switch to that subgroup. 

Selecting a Group Call Contact 

After the radio is registered, you may select a group 
call contact through any of the following methods: 

 

Via the knob: Rotate the Group Call Selector Knob 
to select your desired group call contact. An audio 
alert will be given in case of no group call contact 
preset for this knob. 

 

Via  the  menu:  Go  to  the  menu 

Subgroup

  via 

the Menu or Subgroup key, then use the Up/Down 
key  to  select  your  desired  subgroup. Afterwards, 
select 

Member

  and  use  the  Up  /Down  key  to 

select your desired group call contact. 

 

Via  the  shortcuts: You  can  press  the  programmed 
Group Call List key to access the group call list, and 
select  the  group  call  contact  by  pressing  the  Up/
Down key. 

Managing the Contact

You can manage the contacts via the 

Contact

 

menu. 

Contact List

The Contact List is used to save Private Call contacts 
information. You can access the 

Contact List

 

menu via the 

Contact

 menu or by pressing the 

programmed Contact List key. 
In  the 

Contact  List

  menu,  you  can  check  the 

contact information, edit or delete the private contacts. 

New Contact

You can add and save a new contact to the contact 
list. The number and alias of a new contact must be 
unique. For the contact number range, please refer to 

Dial Scheme

 in the corresponding Feature Book.

Note: Except for adding a new contact, you 
can also save the new numbers from Call 
Logs, ReDial List and BackDial List into the 
contact list. 

Call Services

After the radio is powered on and registered, you can 
make and receive calls. To ensure optimal volume 
of the receiving radio, keep the microphone about 
2.5 to 5 centimeters away from your mouth when 
transmitting. 

Note: If the radio does not register 
successfully or you select an empty group 
by rotating the Group Call Selector Knob, 
the radio cannot make any call. 

Summary of Contents for PD782i


















Reviews: