Hytera PD71XIS Manual Download Page 4

 

because the use of Hytera's or other manufacturer's non-approved accessories may result 

in exposure levels, which exceed the FCC's occupational/controlled environment RF 

exposure limits. 

 

If you are not using a body-worn accessory and are not using the radio in the intended use 

position in front of the face, then ensure the antenna and the radio are kept at least 2.5 cm 

(one inch) from the body when transmitting. Keeping the radio at the proper distance is 

important because RF exposures decrease with increasing distance from the antenna. 

 

Use only manufacturer's name approved supplied or replacement antennas, batteries, and 

accessories. Use of non-manufacturer-name approved antennas, batteries, and 

accessories may exceed the FCC RF exposure guidelines. 

 

Contact your local dealer for the optional accessories of the product. 

The device has been tested and compliance with SAR limits, users can obtain Canadian information on 

RF exposure and compliance 

Après examen de ce matériel aux conformité aux limites DAS et/ou aux limites d’intensité de champ RF, 

les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and compliance d’acquérir 

les informations correspondantes 

EU Regulatory Conformance 

As certified by the qualified laboratory, the product is in compliance with the essential requirements and 

other relevant provisions of the following directives: 

  1999/5/EC or 2014/53/EU 

  2006/66/EC 

  2011/65/EU 

  2012/19/EU 

ISEDC  Statement

Opera

d

RSS

ith

This device complies w

tion is subject to the following two conditions:

(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Innovation, Science and Economic Development Canada

 standar (

CNR d'ISEDC applicables aux

br

de

Le présent appareil est conforme aux

appareils radio exempts  de licence. 

L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire 

ouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le 

brouillage est susceptible d'en compromettre le fonctionnement

 

Please note that the above information is applicable to EU countries only. 

Summary of Contents for PD71XIS



























Reviews: