Hytera PD41X Manual Download Page 26

                                                                                                                                                                                                                     

 

25

Care and Cleaning

 

To guarantee optimal performance as well as a long service life of the product, please follow the tips 

below.  

Product Care 

 

Do not pierce or scrape the product with any edged instruments or hard objects.   

 

Keep the product far away from substances that can corrode the circuit.   

 

Do not hold the product by its antenna or earpiece cable directly.   

 

Attach the accessory jack cover when the product is not in use.   

Product Cleaning 

 

Clean up the dust and fine particles on the product surface and charging piece with a clean and dry 

lint-free cloth or a brush regularly.   

  Use neutral cleanser and a non-woven fabric to clean the keys, control knobs and front case 

long-time use. Do not use chemical preparations such as stain removers, alcohol, sprays or oil 

preparations, so as to avoid surface case damage. Make sure the product is completely dry before 

use.  

 

Caution:

 Power off and remove the battery before cleaning.   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for PD41X





























Reviews: