Hytera HM78 Series, User Manual

Page: 52 / 64

46
8.7 One Touch Call/Menu
The One Touch Call/Menu feature allows you to initiate a preset service or switch to the function menu by pressing
the preprogrammed One Touch Call/Menu key.
The following table shows the services that can be implemented by this feature and the corresponding operations.
Mode Description Operation
Conventional Mode
On an analog channel, you can initiate a call to
a 2-tone contact.

Through Numeric Keypad
1. Go to Menu > Settings > Basic
Settings > Keypad Mode ,
select One Touch Call/Menu ,
and then press the OK/Menu
key.
2. On the home screen, press the
numeric key to initiate the
service.

Press the preprogrammed One
Touch Call/Menu key to initiate the
service.
To initiate a call on a digital
channel, you must press and hold
the PTT key after pressing the One
Touch Call/Menu key.
On a digital channel, you can do one of the
following:

Initiate a group, private, or all call.

Send a quick text message or position
message to a private or group contact.

Initiate an alert call, radio check, remote
monitor, revive, or kill service.

Switch to a function menu or realize a
function.
Trunking Mode

Initiate a group, private, all, broadcast, or
emergency call.

Send a quick text, status, or user-defined
message.

Switch to a function menu or realize a
function.
8.8 Quick Dial
On the home screen, the Quick Dial feature allows you to enable or disable a feature or switch to a function menu
by manual dialing. This feature is available only when the keypad input is enabled.
If You…
In Different Modes Then You Can
…
Press a numeric key (0–9) and then
the OK/Menu key on the home
Conventional mode

Adjust the power level.

Set the backlight.