11
which is with a network card. The network cards can be enabled or disabled as per actual requirements.
To enable a network card, you need to set its IP address as the static IP address or a dynamic IP
address.
Setting the Network Card
Step 1
Press the
Up/Down
key to highlight “IP settings” in the main menu, as shown below.
Step 2
Press the
OK
key to enter the menu, as shown below.
Step 3
Press the
Up/Down
key to highlight “Network0” or “Network1”, and then press the
OK
key to
enter the menu.
Step 4
Press the
OK
key to select “Netcard”, and then press the
Up/Down
key to highlight “Enable” or
“Disable”.
Step 5
Press the
OK
key to finish.
Setting the Local IP Address
z
To set the static IP address
