S825/1
mode and then repeatedly pressing the
SETUP
button, to scroll though
the calibration factor changing routine, until the unit of measure is
displayed on the next screen. Change the unit of measure by pressing
the
ON/CLEAN
or
TOTAL
button. Once the unit of measure has been
set and no more buttons are pressed the meter will return to the normal
operation mode after 3 seconds and retain the changes made.
HO25/40/50AMM & HO25SMM
1. Resettable totalizer – To reset the lower, resettable totalizer press the
reset button.
2. Calibration – The calibration of these meters is factory set and cannot be
adjusted.
