background image

Precautions and System Maintenance 

¾

  There are two types of Patrol Points: Patrol Point with Adapter Jack and Patrol Point without 

Adapter Jack. The former one is used indoors and adopts the power supply with adapter or 

battery. The latter one is used indoors and outdoors, and can be powered by battery only. 

 

¾

 

When used indoors, it is suggested to adopt the Patrol Point with Adapter Jack, to use the power 

supply with adapter and ensure long-time reliable operation.   

 

¾

  When used outdoors, the Patrol Point without Adapter Jack must be selected, to ensure 

effective water protection. 

 

¾

  If adopting power supply with battery, the power situation of the battery will be transmitted with 

Tx code to the radio. Then the power situation of each Patrol Point can be viewed after read or 

received via the patrol management software. Replace the battery immediately when it runs low.

 

 

Product Inspection

 

Please unpack the package box carefully and check that all items shipped were received; report any 

missing or damaged items to your dealer.

 

 

Supplied Items (for Patrol Point without Adapter Jack)

 

Item 

Qty. (PCS) 

Patrol Recorder (Patrol Point) 

Owner’s Manual 

Accessory Bag (4 

O

-ring screws/ 4 expansion 

screws/ 4 rubber stoppers)

 

 

Supplied Items (for Patrol Point with Adapter Jack)

 

Item 

Qty. (PCS) 

Patrol Recorder (Patrol Point) 

Adapter

  

Owner’s Manual

 

Accessory Bag (4 

O

-ring screws/ 4 expansion 

screws/ 4 rubber stoppers)

 

 

 

Summary of Contents for TX-92













Reviews: