HYT TM-800K, Service Manual

Page: 8 / 128

TM-800K Service Manual
6
Software Specifications
Radio Modes
Frame of Radio Modes
Keypad Entry for Mode Startup
MODE Main Menu Display/Sub Menu Operation Remarks
USER MODE Conventional Mode -------------------------------
Turn on the radio to enter
Conventional Mode
Test Mode -------------------------------
Adjust Mode -------------------------------
TEST &
ADJUST
MODE
Model Set Mode -------------------------------
While holding down [ PF2 ] key,
turn on the radio
Firmware Version Display Mode -------------------------------
While holding down [ PF3 ] key,
turn on the radio
Firmware Programming Mode -------------------------------
While holding down [ PF4 ] key,
turn on the radio
Wired Clone Mode -------------------------------
While holding down [ PF5 ] key,
turn on the radio
PC Programming Mode ------------------------------- Receive commands from PC
Note: When power-on password is enabled, you must input the correct password before you can
enter User Mode.
You can input password through the keypad and press [ # ] to clear.
Error Information and Measures in User Mode
The radio self-checks when power on. If no error is detected, the radio enters conventional mode.
While the radio will sound alert once any error is checked.
Firmware Programming Mode
PC Programming Mode
Clone Mode Wired Clone Mode
User Mode
Conventional Mode
Model Set Mode
Test & Adjust Mode